Onga Pentair Mako Shark Automatic Pool Cleaner

The European made MakoShark is new and improved version of Hammer Head pool cleaner. Coming fully assembled is set for ultimate carefree operation. Just add the seal, connect the hoses and you are on cruise in matter of moments.

Key Features:

• No bags or compartments to empty or replace, dirt and debris go right to your filtration equipment, where they belong
• Simple new design for long dependable life – No wheels or gears to jam or diaphragms to replace
• No expensive booster pump to buy and operate – saving you money and energy…it uses your pool’s existing filtration system
• Only one operational moving part…only 8 parts in total
• All parts are UV stable and chemical resistant for years of dependable service
• Sleek, compact design increases maneuverability for best cleaning performance
• Backed by the largest pool equipment company in the world
• Three year warranty.
• The Onga MakoShark Pool Cleaner is:-
• Suitable for in ground pools – concrete, pebblecrete, quartzon, tile, fibreglass and vinyl surfaces.

Benefits:

• High Performance: Its sleek and compact design lets it travel around the pool in a fast and efficient manner, cleaning all areas including floor, walls, steps and sides.
• Sensationally Dependable: Proven on more than 2 million pools worldwide, with only one moving part and an elegant minimalist design comprised of just 8 parts.
• Easy to Setup: Comes almost fully assembled out of the box. Just add the seal, and plug the hoses and it is ready to go.
• 3 Years Warranty: Backed by the largest pool equipment company in the world.
• Suitable for all Pool Surfaces

Whats in the box?

• 1 x External Body
• 1 x Suction Seal
• 1 x Swivel & Nut Assembly
• 1 x Threaded Adapter
• 1 x Skimmer Adapter Cuff
• 1 x Adjustable Regulator Valve
• 1 x 90 Degree Elbow
• 1 x Flow Gauge
• 2 x Hose Weight
• 10 x Hose 1m Sections
• 1 x Installation Instructions
• 1 x Warranty Card

Easy Pool Suction Cleaner Assembly and Installation Guide:

Getting your new suction cleaner up and running is not as complicated as many people think and you can actually set one up in under five minutes! 

• Install the skirt over the base (wearing sole) of the suction cleaner. 
• If you cleaner uses wings, attach them from the rear to the front and clip them together.
• Install the deflector ring or bumper (if you skip this, the cleaner has the tendency to get caught in corners).
• Connect the hose lengths, just enough to cover the size of your pool. If you have extras, just keep them as spares. 
• Submerge the cleaner in your pool and hold the end of the hose against a return jet to blow out the air in the hoses. Once the cleaner has stopped bubbling, connect the hose to your skimmer’s vacuum plate. 
• If you’re using a flow valve, adjust the flow to the required level.
• Attach hose weights if your hose is pulling your cleaner up, and hose floats if your hose is dragging or getting tangled up.
• After using, disassemble your cleaner, give it a hose down with fresh water and store away from direct sunlight. Don’t forget to empty out your skimmer and pump baskets as well after cleaning the pool with a suction cleaner.

If you’re more of a visual-type person, here’s a video of how a suction cleaner is assembled. (It will open in a new window, don’t worry)